f t m
Copyright 2017 - Posi Lock Puller, Inc. | 805 Sunflower Avenue | Cooperstown, North Dakota 58425 USA | Phone: +1-701-797-2600 | Toll Free: 1-800-533-5761 | Fax: +1-701-797-2706

Optional Accessories

 

ModelTip Protector
204 P-4
104 P-4
206 P-6
106 P-6
208 P-10
108 P-10
210 P-10
110 P-10
213 P-13/16
113 P-13/16
216 P-13/16
116 P-13/16

Replacement Tip Protectors

Unfortunately, a puller's center bolt can only withstand so much torque before it begins to flatten; it's in its nature. However, our Tip Protectors can save your investment if you intend to subject your puller to high levels of torque. If you intend to use an impact wrench on your manual puller, be advised:

manual pullers are not made for the unforgiving power of an impact wrench, and such use will not only void your Posi Lock warranty, but also runs the risk of flattening the tip of the puller's center bolt. 

 

Protect your investment: use a Tip Protector! It is made to break if too much torque is applied, letting you know to stop before the center bolt—and possibly the jaw head assembly and worse—are ruined. Tip Protectors are cheaper to replace than the center bolt, and they can vastly prolong the life of your already durable Posi Lock® puller. In fact, we believe so much in the effectiveness of our Tip Protectors, that we include one, free, with every single puller!* 

If the Tip Protector included with your puller does break, another can be purchased through your nearest distributor. Use this table to learn which Tip Protector is meant for your puller. If you are unsure which puller you have, please either consult our puller specs or contact us.

 

*102, 103, 202, and 203 pullers are too small for a Tip Protector, and thus we neither manufacture nor include one with these models.

 


 

ModelBolt ExtenderAdditional Length
 204 X-4 1.33 in. (33 mm)
104 X-4 1.33 in. (33 mm)
206 X-6 1 in. (25 mm)
106 X-6 1 in. (25 mm)
208 X-10 0.81 in. (20 mm)
108 X-10 0.81 in. (20 mm)
210 X-10 0.81 in. (20 mm)
110 X-10 0.81 in. (20 mm)

Bolt Extenders

For a little added reach, a Bolt Extender provides the protection of a Tip Protector while extended the length of the center bolt. If you're encountering stubborn bearings that require a slight extension of your puller's reach, a Bolt Extender can help.

 


 

Jaw Extensions and Transmission Jaws

To expand the reach and spread of your 108-116 manual puller, use our Long or Extra Long Jaws. Optionally, you can order a set of Transmission Jaws—made with a tapered edge designed to fit into narrow snap-ring grooves—and enable your regular puller to function similarly to a TJ-series puller.

 
Long Jaws/Extra Long Jaws   Transmission Jaws
Model Part number Reach Spread
204 - - - 10454T
104 - - - 10454T
206 - - - 10654T
106 - - - 10654T
208 11054/11054L 10 in. (254 mm)/16 in. (406 mm) 1.5 to 15 in. (38 to 381 mm)/2.25 to 22 in. (57 to 559 mm) 11054T
108 11054/11054L 10 in. (254 mm)/16 in. (406 mm) 1.5 to 15 in. (38 to 381 mm)/2.25 to 22 in. (57 to 559 mm) 11054T
210 11054L 16 in. (406 mm) 2.25 to 22 in. (57 to 559 mm) 11054T
110 11054L 16 in. (406 mm) 2.25 to 22 in. (57 to 559 mm) 11054T
213 11354L 20 in. (508 mm) 1.5 to 30 in. (38 to 762 mm) -
113 11354L 20 in. (508 mm) 1.5 to 30 in. (38 to 762 mm) -
216 11654L 26 in. (660 mm) 2 to 38 in. (51 to 965 mm) -
116 11654L 26 in. (660 mm) 2 to 38 in. (51 to 965 mm) -

 


 

Transmission Puller Accessories

In addition to the Transmission Jaws sold with the TJ-series pullers, we offer standard jaws that can be used to convert your Transmission Puller into a standard manual puller. Just like with our other standard pullers, we offer long jaws to extend your reach. Additionally, a Slide Rod Adapter, Slide Rod, and Slide Hammer can be used to enable your external puller to function much the same as an internal puller.

Below is a chart matching our TJ-series pullers to their optional accessories.

 

ModelAccessoriesOptional Standard Jaws*
Description Part # Jaw Style Reach Spread
TJ-1 TJ-1 Bolt Extender X10 Jaw - 10854 8 in.
(203 mm)
.75 to 12 in.
(19 to 305 mm)
Long Jaw - 11054 10 in.
(254 mm)
2.25 to 15 in.
(57 to 381 mm)
Extra Long Jaw - 11054L 16 in.
(406 mm)
1.5 to 22 in.
(38 to 559 mm)
TJ-2
 
TJ-2 Bolt Extender X6 Jaw-10654
 
6 in.
(152 mm)
 
.5 to 7 in.
(13 to 178 mm) 
Slide Rod Adapter 10661
Slide Rod 10561
2.5 lb Slide Hammer 10562
5.0 lb Slide Hammer  10563
TJ-3 TJ-3 Bolt Extender X4 Jaw - 10454 4 in.
(102 mm)
.5 to 5 in.
(13 to 127 mm)
Slide Rod 10561
2.5 lb Slide Hammer 10562
5.0 lb Slide Hammer 10563

 

*We do not offer longer versions of our specially-tapered Transmission Jaws; these optional additions to your TJ-series pullers are the standard jaws offered with our other pullers.

 


 

TK-107/TB-1045 Accessories
Description Part #
5 lb (22.7 kg) Slide Hammer 10563
Small Hub Collar
0 to 1.5 in. (0 to 38 mm)
HP-30
Large Hub Collar
0 to 2 in. (0 to 51 mm)
HP-40
Extra Large Hub Collar
0 to 3 in. (0 to 76 mm)
HP-50
Tip Reducer/Extender HP-70
Bolt Extender X4
Transmission Jaw 10454T

Puller Set Accessories

Adding optional items increases the versatility of the TB-1045 and TK-107 sets. The 5 lb hammer adds pulling power for tough jobs, and the hub collar's unique design will remove fans, blower wheels, and bearings.